Pitney Bowes U100 Modular Mailing Processor 2

This system uses the envelope length information from the idler encoder and flap edge information from the flap array to set a path for the nozzle. The nozzle motor guides the nozzle 1/4 inch inside the flap edge as the pump motor pumps a metered amount of water through the nozzle. As the sealer transport rollers move the mailpiece out of the sealer, the flap is diverted back above the deck surface by a deflector mounted to the registration wall. When the envelope is fed up through the gap between the decks, the ski and transport assemblies pick up the envelope and press the flap against the envelope surface.